Faculty
Location:Faculty&Staff > Faculty
ZHAO Ming

PHDAssociate Professor,

School of Materials Science, Tsinghua University, Beijing.

AddressRoom C420, Yifu Technique Building, Tsinghua University, Beijing, China.

Tel+86-10-6278-6131

E-mail: zhaoming2013@mail.tsinghua.edu.cn

expand>>
Education Background

·         2005/042008/04  Japan · Kyoto University · Department of Micro Engineering,

PHD of Engineering

·         2001/092004/07  China · Tsinghua University · Department of Mechanical Engineering,

Master of Engineering

·         1997/072001/07  China · Tsinghua University · Department of Mechanical Engineering,

Bachelor of Engineering


Work Resume

·          2013/08 – Now     China· Tsinghua University · School of Materials Science,

Associate Professor

·          2009/042013/08  Japan, Tohoku University, Institute for Materials Research,

Assistant Professor

·          2008/042009/04  Japan · Japan Atomic Energy Agency · Takasaki Advanced Radiation Research Institute, Post Doctor researcher

Research Field

·         Cu(In,Ga)Se2 (CIGS) and Cu2ZnSnS4 (CZTS) based thin film solar cells

1.      Target designing and fabrication

2.      absorption layer (CIGS and CZTS) designing and processing

3.      Device processing

·         Oxide semiconductor

1.      N-type amorphous In-Ga-Zn-O (IGZO):

?  component designing

?  devices processing

2.      P-type CuO thin films: optimization of the processing procedure

3.      Transparent conductive oxide semiconductors

Academic Achievements

1.Wu, Yixuan; Zhao, Ming; Zhuang, Daming; Zhang, Ning; Yu, Xinping;  Wei, yaowei;  Lyu, Xunyan;  Ren, Guoan; Wang, Chen; Hu, Lan; Li, Yuxian; Wei, Jinquan;  Gong, Qianming, “The effect of Rb doping on CZTSSe solar cells”, Solar Eenergy 187: 269-273, 2019.

2.Li, Xinchen; Zhuang, Daming; Zhang, Ning; Zhao, Ming; Yu, Xinping; Liu, Peng; Wei, Yaowei; Ren, Guoan, “Achieving 11.95% efficient Cu2ZnSnSe4 solar cells fabricated by sputtering a Cu-Zn-Sn-Se quaternary compound target with a selenization process”, Journal of Materials Chemistry A 7: 9948-9957, 2019.

3.Lyu, Xunyan; Zhuang, Daming; Zhao, Ming; Zhang, Ning; Wei, Yaowei; Wu, Yixuan; Ren, Guoan; Wang, Chen; Hu, Lan; Wei, Jinquan; Gong, Qianming, “Influences of Ga concentration on performances of CuInGaSe2 cells fabricated by sputtering-based method with ceramic quaternary target”, Ceramics International 45: 16405-16410, 2019.

4.Yaowei Wei, Daming Zhuang, Ming Zhao, Qianming Gong, Rujun Sun, Guoan Ren, Yixuan Wu, Leng Zhang, Xunyan Lyu, Xiao Peng, Jinquan Wei, “An investigation on the relationship between open circuit voltage and grain size for CZTSSe thin film solar cells fabricated by selenization of sputtered precursors”, Journal of Alloys and Compounds 773: 689-697, 2019.

5.Yaowei Wei , Daming Zhuang , Ming Zhao, Wenyu Zhang , Guoan Ren, Yixuan Wa, Rujun Sun, Qianming Gong , Leng Zhang , Shilu Zhan , Xiao Peng, Xunyan Lyu, “Beyond 10% efficient CZTSSe thin-film solar cells fabricated by a two-step CdS deposition process”, Solar Energy Materials and Solar Cells 180: 19-24, 2018.

6.Yaowei Wei, Daming Zhuang, Ming Zhao, Qianming Gong, Rujun Sun, Guoan Ren, Yixuan Wu, Leng Zhang, Xunyan Lyu, Xiao Peng, “An investigation on phase transition for as-sputtered Cu2ZnSnSe4 absorbers during selenization”, Solar Energy 164: 58-64, 2018.

7.Rujun Sun, Daming Zhuang, Ming Zhao, Qianming Gong, Yaowei Wei, Guoan Run, Yixuan Wu, “Cu2ZnSnSSe4 solar cells with 9.6% efficiency via selenizing Cu-Zn-Sn-S precursor sputtered from a quaternary target”, Solar Energy Materials and Solar Cells 174: 42-49, 2018

8.Rujun Sun, Daming Zhuang, Ming Zhao, Qianming Gong, Mike Scarpulla, Yaowei Wei, Guoan Run, Yixuan Wu, “Beyond 11% efficient Cu2ZnSn(Se,S)4 thin film solar cells by cadmium alloying”, Solar Energy Materials and Solar Cells 174: 494-498, 2018. 

9.Leng Zhang, Daming Zhuang, Ming Zhao, Qianming Gong, Li Guo, Liangqi Ouyang, Rujun Sun, Yaowei Wei, Shilu Zhan, Xunyan Lyu, “A study on mechanisms of Sb-doping induced grain growth for Cu(InGa)Se2 absorbers deposited from quaternary targets”, Journal of Alloy and Compounds 727: 572-578, 2017.

10.Leng Zhang, Daming Zhuang, Ming Zhao, Qianming Gong, Liangqi Ouyang, LiGuo, Rujun Sun, Yaowei Wei, Shilu Zhan, Xunyan Lyu, Xiao Peng, “Investigation on Sb-doped induced Cu(InGa)Se2 films grain growth by sputtering process with Se-free annealing”, Solar Energy, 157: 1074-1081, 2017.

11.Han Junfeng, Zhao Ming, Liao Cheng, Liu Jiang. “Thin Film Compound Solar Cells”, Beijing Institute of Technology Press, 2017. IBSN978-7-5682-4853-2

12.Xiao Peng; Ming Zhao; Daming Zhuang.; Li Guo; Liqi Ouyang; Leng Zhang; Rujun Sun; Yaowei Wei; Shilu Zhan; Xunyan Lv; Yixuan Wu; Guoan Ren, “Multi-layer strategy to enhance the grain size of CIGS thin film fabricating by single quaternary CIGS target”, Journal of Alloys and Compounds, 710: 172-176, 2017. 

13.S.L.Zhan, M.Zhao, D.M. Zhuang, E.G.Fu, M.J. Cao, L.Guo, L.Q.Ouyang, “The influence of nitrogen implantation on the electrical properties of amouphous IGZO”, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms(NIMB), 406: 596-599, 2017. 

14.Rujun Sun, Ming Zhao, DamingZ huang, Xiaolong Li, Qianming Gong, Liangqi Ouyang, Li Guo, Mingjie Cao, “Cu2ZnSnS4 ceramic target: Determination of sintering temperature by TG-DSC”, Ceramics International, 42, 9630-9635, 2016.

15.Rujun Sun, Ming Zhao, Daming Zhuang, Qianming Gong, Min Xie, Liangqi Ouyang, Li Guo, Leng Zhang, “Effects of selenization on phase transition and S/(S plus Se) ratios of as-deposited Cu2ZnSnS4 absorbers sputtered by a quaternary target”, Materials Letters, 164, 140-143, 2016. 

16.Li Guo, Ming Zhao, Daming Zhuang, Qianming Gong, Tan Hao, Mingjie Cao, Liangqi Ouyang, “A study on phase transformation of SnOx thin films prepared by reactive magnetron sputtering”, Materials Science in Semiconductor Processing,46, 35-38, 2016.

17.Zedong Gao, Ming Zhao, Daming Zhuang, Engang Fu, Xiaolong Li, Liangqi Ouyang, Li Guo, Rujun Sun, Kenji Kimura, Kaoru Nakajima, “Study on the performance of Tungsten-Titanium alloy film as a diffusion barrier for iron in a flexible CIGS solar cell”, Solar Energy, 120, 357-362, 2015.

18.Liangqi Ouyang, Ming Zhao, Daming Zhuang, Junfeng Han, Dedong Gao, Li Guo, Xiaolong Li, Rujun Sun, Mingjie Cao, “Annealing treatment of Cu(in,Ga)Se2 absorbers prepared by sputtering a quaternary target for 13.5% conversion efficiency device”, Solar Energy 118: 375-383, 2015.

19.Liangqi Ouyang, Daming Zhuang, Ming Zhao, Ning Zhang,Xiaolong Li, Li Guo, Rujun Sun, Mingjie Cao, “ Cu(In,Ga)Se2 solar cell with 16.7% active-area efficiency achieved by sputtering from a quaternary target”, Physica Status Solidi A 212:1774-1778, 2015. 

20.Xiaolong Li, Ming Zhao, Daming Zhuang, Mingjie Cao, Liangqi Ouyang, Li Guo, Zedong Gao, Rujun Sun , “Influences of Na on sintering of Cu(In,Ga)Se2 quaternary ceramic targets”, Journal of Alloys and Compounds 636:335-340, 2015.


Copyright © 2020 School of Materials Science and Engineering, Tsinghua University All Rights Reserved.